Pushrod Custom made
Choose Length
Price
Standard length B30 203,5mm (202mm)
245 SEK
Standard length B18/B20 205.5mm (204mm)
245 SEK
200mm =5.5 mm shorter than Original B20 (std lifter)
245 SEK
B20 HP for EV813 + mushroom MR202 lifters (5.5mm shorter total)
245 SEK
custom length
285 SEK
- Secure payment by card
- E-mail us, we reply swiftly!
Description
Article no.: 488
Specially made push rod
Stronger than the original, approx Ø8.7mm
For minimum failure and maximum durability
Call or email for other lengths
On cylinder heads with smaller holes for push rods, these must be taken up for clearance
NOTE.
Keep in mind that the total length of our special push rods is 1.5 mm longer than standard, due to the bowl being deeper than on an original push rod.
For example, an original B20 push rod is 204mm.
If you want to replace this straight off with our special push rods, our push rod will be 205.5 mm, = Standard Length B18 / B20.
200mm is a standard length to use on the B20 together with standard lifters and very flat top caps.
B20HP is used together with EV813 and mushroom MR202 lifter.