Rocker bridge B18/B20

Renovation of rocker arm bridge B18/B20 Can be obtained with new bushings at an additional cost if the original bushings are not good, see 350550RVB. We are reusing your axle, so it must be in good condition. Everything is washed and blasted. Radius against valve is ground. Plugs at the ends of the shaft are removed and the shaft is cleaned internally. We install new plugs plus polish the installation surface on the axle. Adjustment screws are cleaned and threads in the rockers are cleaned. New nuts and lock rings are installed. NOTE: We renovate your own rocker arm bridge.